Inconel 825 WasherUNS N08825 · ASME B18.22.1 · Manufacturer, trader & exporter, India
Incoloy 825 · Alloy 825
An Inconel 825 washer is a flat or spring ring that spreads bolt load. Finished fastener specification not asserted; material and manufacturing route not asserted — alloy (UNS N08825), dimensions and finished requirements are to the purchase specification. Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion.
See the Inconel 825 fasteners grade form page for standards and sizes.
- UNS N08825
- ASME B18.22.1
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Washer?
- What it is
- A flat or spring ring that spreads bolt load
- Finished spec
- Not asserted
- Material / feedstock
- Not asserted — alloy (UNS N08825), dimensions and finished requirements are to the purchase specification
- Dimensions
- ASME B18.22.1 · DIN 125 (legacy DIN)
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking
Inconel 825 Washer Specification
| Product | Inconel 825 Washer |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | Not asserted — alloy (UNS N08825), dimensions and finished requirements are to the purchase specification |
| Dimensional standard | ASME B18.22.1 · DIN 125 (legacy DIN) |
| Manufacturing route | Not asserted |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | To suit M10 – M64 · ½" – 4" bolts (others on request) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Washer
Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion.
- Flat, spring and lock
- ASME B18.21.1 · DIN 125 / 127 (legacy DIN)
- Material to match the bolt
More on choosing: Washer guide.
Inconel 825 Washer: Why 825 for washers
Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Inconel 825 (bar to ASTM B425, where applicable), as the project specifies |
Inconel 825 Washer Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Iron | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Titanium | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B424 / B423 / B564 for UNS N08825.
Inconel 825 Washer Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B424 / B423 / B564 for UNS N08825 — Annealed.
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Standards on this page
Other Inconel 825 fasteners
Inconel 825 Washer — questions buyers ask
Do I need washers on flange bolting?
Many specifications require through-hardened washers under nuts for controlled tightening; follow the project bolting spec.
What nut is used with Inconel 825 washers?
Usually a nut in the same alloy — it may be machined from ASTM B425 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Inconel 825 washers?
Finished fastener specification: Not asserted. Material / feedstock: Not asserted — alloy (UNS N08825), dimensions and finished requirements are to the purchase specification. Dimensions: ASME B18.22.1 · DIN 125 (legacy DIN). State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Inconel 825 washer?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026