Super Duplex 2507 Stud BoltASTM A1082 · ASME B18.31.2 · Manufacturer, trader & exporter, India
UNS S32750 · W.Nr 1.4410
A Super Duplex 2507 stud bolt is a fully threaded rod supplied with two heavy hex nuts. ASTM A1082 (S32750) where specified; otherwise may be machined from ASTM A276 / A479 bar (UNS S32750), where applicable — finished requirements to the purchase specification or project drawing. Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables.
- ASTM A1082
- ASME B18.31.2
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Stud Bolt?
- What it is
- A fully threaded rod supplied with two heavy hex nuts
- Finished spec
- ASTM A1082 (S32750) where specified
- Material / feedstock
- ASTM A276 / A479 bar (UNS S32750), where applicable
- Dimensions
- ASME B18.31.2 · B16.5 bolting tables
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Stud Bolt Specification
| Product | Super Duplex 2507 Stud Bolt |
|---|---|
| Finished fastener specification | ASTM A1082 (S32750) where specified |
| Material / feedstock specification | ASTM A276 / A479 bar (UNS S32750), where applicable |
| Dimensional standard | ASME B18.31.2 · B16.5 bolting tables |
| Manufacturing route | To the finished specification where specified; otherwise machining from bar, where applicable |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Stud Bolt
Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables.
- Fully threaded, with two heavy hex nuts
- Length per ASME B16.5 flange class
- UNC up to 1", UN-8 above
More on choosing: Stud bolt guide.
Super Duplex 2507 Stud Bolt: Why 2507 for stud bolts
Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex fasteners add strength in chloride service. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| Bolting | B7 (coated), B8M or duplex studs, as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Stud Bolt Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Stud Bolt Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Standards on this page
Other Super Duplex 2507 fasteners
Super Duplex 2507 Stud Bolt — questions buyers ask
How is stud bolt length measured?
From first thread to first thread, excluding chamfered points, as tabulated in ASME B16.5.
What nut is used with Super Duplex 2507 stud bolts?
Usually a nut in the same alloy — it may be machined from ASTM A276 / A479 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Super Duplex 2507 stud bolts?
Finished fastener specification: ASTM A1082 (S32750) where specified. Material / feedstock: ASTM A276 / A479 bar (UNS S32750), where applicable. Dimensions: ASME B18.31.2 · B16.5 bolting tables. State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Super Duplex 2507 stud bolt?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026