Hastelloy C22 WasherUNS N06022 · ASME B18.22.1 · Manufacturer, trader & exporter, India
Alloy C-22 · UNS N06022
A Hastelloy C22 washer is a flat or spring ring that spreads bolt load. Finished fastener specification not asserted; material and manufacturing route not asserted — alloy (UNS N06022), dimensions and finished requirements are to the purchase specification. Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion.
- UNS N06022
- ASME B18.22.1
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Hastelloy C22 Washer?
- What it is
- A flat or spring ring that spreads bolt load
- Finished spec
- Not asserted
- Material / feedstock
- Not asserted — alloy (UNS N06022), dimensions and finished requirements are to the purchase specification
- Dimensions
- ASME B18.22.1 · DIN 125 (legacy DIN)
- Grade
- Hastelloy C22 · UNS N06022
- Best at
- Mixed oxidising and reducing acids, and weld overlays
Hastelloy C22 Washer Specification
| Product | Hastelloy C22 Washer |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | Not asserted — alloy (UNS N06022), dimensions and finished requirements are to the purchase specification |
| Dimensional standard | ASME B18.22.1 · DIN 125 (legacy DIN) |
| Manufacturing route | Not asserted |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | To suit M10 – M64 · ½" – 4" bolts (others on request) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Washer
Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion.
- Flat, spring and lock
- ASME B18.21.1 · DIN 125 / 127 (legacy DIN)
- Material to match the bolt
More on choosing: Washer guide.
Hastelloy C22 Washer: Why C22 for washers
Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion. In Hastelloy C22, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Hastelloy C22 is picked for mixed oxidising and reducing acids, and weld overlays. |
|---|---|
| Typical service | Chemical processing — Equipment seeing both oxidising and reducing conditions. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Hastelloy C22 (bar to ASTM B574, where applicable), as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Hastelloy C22 Washer Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Iron | As specified |
| Tungsten | As specified |
| Cobalt | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B575 for UNS N06022.
Hastelloy C22 Washer Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B575 for UNS N06022 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Hastelloy C22 grade page.
Standards on this page
Other Hastelloy C22 fasteners
Hastelloy C22 Washer — questions buyers ask
Do I need washers on flange bolting?
Many specifications require through-hardened washers under nuts for controlled tightening; follow the project bolting spec.
What nut is used with Hastelloy C22 washers?
Usually a nut in the same alloy — it may be machined from ASTM B574 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Hastelloy C22 washers?
Finished fastener specification: Not asserted. Material / feedstock: Not asserted — alloy (UNS N06022), dimensions and finished requirements are to the purchase specification. Dimensions: ASME B18.22.1 · DIN 125 (legacy DIN). State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Hastelloy C22 washer?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026