Hastelloy C22 Stud BoltUNS N06022 · ASME B18.31.2 · Manufacturer, trader & exporter, India
Alloy C-22 · UNS N06022
A Hastelloy C22 stud bolt is a fully threaded rod supplied with two heavy hex nuts. Finished fastener specification not asserted; may be machined from ASTM B574 bar (UNS N06022), where applicable; finished fastener requirements are to the purchase specification or project drawing. Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables.
- UNS N06022
- ASME B18.31.2
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Hastelloy C22 Stud Bolt?
- What it is
- A fully threaded rod supplied with two heavy hex nuts
- Finished spec
- Not asserted
- Material / feedstock
- ASTM B574 bar (UNS N06022), where applicable
- Dimensions
- ASME B18.31.2 · B16.5 bolting tables
- Grade
- Hastelloy C22 · UNS N06022
- Best at
- Mixed oxidising and reducing acids, and weld overlays
Hastelloy C22 Stud Bolt Specification
| Product | Hastelloy C22 Stud Bolt |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | ASTM B574 bar (UNS N06022), where applicable |
| Dimensional standard | ASME B18.31.2 · B16.5 bolting tables |
| Manufacturing route | May be machined from bar, where applicable |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Stud Bolt
Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables.
- Fully threaded, with two heavy hex nuts
- Length per ASME B16.5 flange class
- UNC up to 1", UN-8 above
More on choosing: Stud bolt guide.
Hastelloy C22 Stud Bolt: Why C22 for stud bolts
Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables. In Hastelloy C22, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Hastelloy C22 is picked for mixed oxidising and reducing acids, and weld overlays. |
|---|---|
| Typical service | Chemical processing — Equipment seeing both oxidising and reducing conditions. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Hastelloy C22 (bar to ASTM B574, where applicable), as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Hastelloy C22 Stud Bolt Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Iron | As specified |
| Tungsten | As specified |
| Cobalt | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B575 for UNS N06022.
Hastelloy C22 Stud Bolt Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B575 for UNS N06022 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Hastelloy C22 grade page.
Standards on this page
Other Hastelloy C22 fasteners
Hastelloy C22 Stud Bolt — questions buyers ask
How is stud bolt length measured?
From first thread to first thread, excluding chamfered points, as tabulated in ASME B16.5.
What nut is used with Hastelloy C22 stud bolts?
Usually a nut in the same alloy — it may be machined from ASTM B574 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Hastelloy C22 stud bolts?
Finished fastener specification: Not asserted. Material / feedstock: ASTM B574 bar (UNS N06022), where applicable. Dimensions: ASME B18.31.2 · B16.5 bolting tables. State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Hastelloy C22 stud bolt?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026