Super Duplex 2507 Swivel Ring FlangeASTM A182 · ISO 27509 / project specs · Manufacturer, stockist & exporter, India
UNS S32750 · W.Nr 1.4410 · SRF
A Super Duplex 2507 swivel ring flange is a flange with a rotating ring that allows bolt holes to be aligned after welding, made from Super Duplex 2507 to ASTM A182 F53. Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible.
- ASTM A182
- ISO 27509 / project specs
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Swivel Ring Flange?
- What it is
- A flange with a rotating ring that allows bolt holes to be aligned after welding
- Material
- ASTM A182 F53
- Dimensions
- ISO 27509 / project specs
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Swivel Ring Flange Specification
| Product | Super Duplex 2507 Swivel Ring Flange |
|---|---|
| Material standard | ASTM A182 F53 |
| Dimensional standard | ISO 27509 / project specs |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Swivel Ring Flange
Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible.
- Hub welded to pipe; ring rotates
- Common on subsea and offshore lines
- Made to ISO 27509 / DNV or project specs
More on choosing: Swivel ring flange guide.
Super Duplex 2507 Swivel Ring Flange: Why 2507 for swivel ring flanges
Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex flanges give stainless corrosion resistance with roughly twice the strength of 316L. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| B16.5 material group | 2.8 |
| Bolting | B7 (coated), B8M or duplex studs, as the project specifies |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Swivel Ring Flange Chemical Composition
| Element | Weight % |
|---|---|
| Chromium | 24.0 – 26.0 |
| Nickel | 6.0 – 8.0 |
| Molybdenum | 3.0 – 5.0 |
| Nitrogen | 0.24 – 0.32 |
| Copper | 0.50 max |
| Carbon | 0.030 max |
| Manganese | 1.20 max |
| Silicon | 0.80 max |
Super Duplex 2507 Swivel Ring Flange Mechanical Properties
| Solution-annealed plate & sheet | Value |
|---|---|
| Tensile strength | 795 MPa · 116 ksi |
| Yield strength 0.2% | 550 MPa · 80 ksi |
| Elongation | 15% |
| Hardness | 310 HB max |
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Other Super Duplex 2507 flanges
Super Duplex 2507 Swivel Ring Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSuper Duplex 2507 Swivel Ring Flange — questions buyers ask
Where are swivel ring flanges used?
Mainly in subsea and offshore pipelines, risers and spools where alignment in place is difficult.
What pressure rating does a Super Duplex 2507 swivel ring flange have?
It depends on class and temperature. Super Duplex 2507 forgings are in ASME B16.5 material group 2.8; read your class column in that group's table at the design temperature.
Can Super Duplex 2507 swivel ring flanges be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex 2507 swivel ring flanges?
The material is ASTM A182 F53; dimensions follow ISO 27509 / project specs. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex 2507 swivel ring flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Super Duplex 2507 swivel ring flanges to NACE MR0175?
Yes. Super Duplex 2507 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026