Incoloy 800 / 800H / 800HT Anchor FlangeASTM B564 · Project drawing · Manufacturer, trader & exporter, India
Alloy 800 · UNS N08800 / N08810 / N08811 · ANC
An Incoloy 800 / 800H / 800HT anchor flange is a forged ring welded into a pipeline to fix it to a structure, made from Incoloy 800 / 800H / 800HT to ASTM B564. Anchor flanges restrain pipelines against thrust and movement — at pump stations, river crossings and pig traps. They are made to project drawings.
- ASTM B564
- Project drawing
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Incoloy 800 / 800H / 800HT Anchor Flange?
- What it is
- A forged ring welded into a pipeline to fix it to a structure
- Material
- ASTM B564
- Dimensions
- Project drawing
- Grade
- Incoloy 800 / 800H / 800HT · UNS N08800
- Best at
- Furnaces, petrochemical heaters and high-temperature piping
Incoloy 800 / 800H / 800HT Anchor Flange Specification
| Product | Incoloy 800 / 800H / 800HT Anchor Flange |
|---|---|
| Material standard | ASTM B564 |
| Dimensional standard | Project drawing |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Anchor Flange
Anchor flanges restrain pipelines against thrust and movement — at pump stations, river crossings and pig traps. They are made to project drawings.
- Made to drawing
- Usually weld neck on both sides
- Often large and heavy forgings
More on choosing: Anchor flange guide.
Incoloy 800 / 800H / 800HT Anchor Flange: Why 800 for anchor flanges
Anchor flanges restrain pipelines against thrust and movement — at pump stations, river crossings and pig traps. They are made to project drawings. In Incoloy 800 / 800H / 800HT, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Incoloy 800 / 800H / 800HT is picked for furnaces, petrochemical heaters and high-temperature piping. |
|---|---|
| Typical service | Petrochemical — Steam-methane reformer and ethylene furnace piping. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Incoloy 800 / 800H / 800HT (bar to ASTM B408, where applicable), as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Incoloy 800 / 800H / 800HT Anchor Flange Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Copper | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B409 for UNS N08800 / N08810.
Incoloy 800 / 800H / 800HT Anchor Flange Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B409 for UNS N08800 / N08810 — Annealed plate.
Full chemistry, properties and equivalents are on the Incoloy 800 / 800H / 800HT grade page.
Standards on this page
Other Incoloy 800 / 800H / 800HT flanges
Incoloy 800 / 800H / 800HT Anchor Flange — questions buyers ask
What information is needed to quote an anchor flange?
The project drawing with pipe size, wall, design loads and material, plus the inspection plan.
Can Incoloy 800 / 800H / 800HT anchor flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Incoloy 800 / 800H / 800HT anchor flanges?
The material is ASTM B564; dimensions follow Project drawing. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Incoloy 800 / 800H / 800HT anchor flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026