Incoloy 800 / 800H / 800HT Long Weld Neck FlangeASTM B564 · ASME B16.5 (flange end) · Manufacturer, stockist & exporter, India
Alloy 800 · UNS N08800 / N08810 / N08811 · LWN
An Incoloy 800 / 800H / 800HT long weld neck flange is a weld neck flange with an extended straight neck, used as a vessel nozzle, made from Incoloy 800 / 800H / 800HT to ASTM B564. Long weld neck flanges are used as nozzles on vessels and columns, with the neck welded into the shell. Standard neck lengths are 9" and 12", or made to drawing.
- ASTM B564
- ASME B16.5 (flange end)
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Incoloy 800 / 800H / 800HT Long Weld Neck Flange?
- What it is
- A weld neck flange with an extended straight neck, used as a vessel nozzle
- Material
- ASTM B564
- Dimensions
- ASME B16.5 (flange end)
- Grade
- Incoloy 800 / 800H / 800HT · UNS N08800
- Best at
- Furnaces, petrochemical heaters and high-temperature piping
Incoloy 800 / 800H / 800HT Long Weld Neck Flange Specification
| Product | Incoloy 800 / 800H / 800HT Long Weld Neck Flange |
|---|---|
| Material standard | ASTM B564 |
| Dimensional standard | ASME B16.5 (flange end) |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Long Weld Neck Flange
Long weld neck flanges are used as nozzles on vessels and columns, with the neck welded into the shell. Standard neck lengths are 9" and 12", or made to drawing.
- Heavy-barrel and equal-barrel designs
- Neck length 9" / 12" or to drawing
- Often machined from solid bar in alloys
More on choosing: Long weld neck flange guide.
Incoloy 800 / 800H / 800HT Long Weld Neck Flange: Why 800 for long weld neck flanges
Long weld neck flanges are used as nozzles on vessels and columns, with the neck welded into the shell. Standard neck lengths are 9" and 12", or made to drawing. In Incoloy 800 / 800H / 800HT, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Incoloy 800 / 800H / 800HT is picked for furnaces, petrochemical heaters and high-temperature piping. |
|---|---|
| Typical service | Petrochemical — Steam-methane reformer and ethylene furnace piping. |
| Bolting | B7 (coated), B8M or nickel-alloy studs such as Incoloy 800 / 800H / 800HT from ASTM B408, as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Incoloy 800 / 800H / 800HT Long Weld Neck Flange Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | 30.0 – 35.0 |
| Chromium | 19.0 – 23.0 |
| Iron | 39.5 min |
| Carbon | 0.10 max (800) · 0.05 – 0.10 (800H) |
| Aluminium | 0.15 – 0.60 |
| Titanium | 0.15 – 0.60 |
| Copper | 0.75 max |
| Manganese | 1.5 max |
Incoloy 800 / 800H / 800HT Long Weld Neck Flange Mechanical Properties
| Annealed plate | Value |
|---|---|
| Tensile strength | 520 MPa · 75 ksi (800) · 450 MPa · 65 ksi (800H) |
| Yield strength 0.2% | 205 MPa · 30 ksi (800) · 170 MPa · 25 ksi (800H) |
| Elongation | 30% |
Full chemistry, properties and equivalents are on the Incoloy 800 / 800H / 800HT grade page.
Other Incoloy 800 / 800H / 800HT flanges
Incoloy 800 / 800H / 800HT Long Weld Neck Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiIncoloy 800 / 800H / 800HT Long Weld Neck Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
Incoloy 800 / 800H / 800HT Long Weld Neck Flange — questions buyers ask
What is the difference between equal-barrel and heavy-barrel LWN?
Equal-barrel has a uniform neck; heavy-barrel has a thicker neck for extra reinforcement at the vessel wall.
Can Incoloy 800 / 800H / 800HT long weld neck flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Incoloy 800 / 800H / 800HT long weld neck flanges?
The material is ASTM B564; dimensions follow ASME B16.5 (flange end). Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Incoloy 800 / 800H / 800HT long weld neck flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026