Inconel 718 Anchor FlangeProject drawing · Manufacturer, trader & exporter, India
Alloy 718 · UNS N07718 · ANC
An Inconel 718 anchor flange is a forged ring welded into a pipeline to fix it to a structure, made from Inconel 718 to project / purchase specification dependent. Anchor flanges restrain pipelines against thrust and movement — at pump stations, river crossings and pig traps. They are made to project drawings.
- Inconel 718
- Project drawing
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 718 Anchor Flange?
- What it is
- A forged ring welded into a pipeline to fix it to a structure
- Material
- project / purchase specification dependent
- Dimensions
- Project drawing
- Grade
- Inconel 718 · UNS N07718
- Best at
- Very high strength at temperatures up to about 650 °C
Inconel 718 Anchor Flange Specification
| Product | Inconel 718 Anchor Flange |
|---|---|
| Material standard | project / purchase specification dependent |
| Dimensional standard | Project drawing |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Anchor Flange
Anchor flanges restrain pipelines against thrust and movement — at pump stations, river crossings and pig traps. They are made to project drawings.
- Made to drawing
- Usually weld neck on both sides
- Often large and heavy forgings
More on choosing: Anchor flange guide.
Inconel 718 Anchor Flange: Why 718 for anchor flanges
Anchor flanges restrain pipelines against thrust and movement — at pump stations, river crossings and pig traps. They are made to project drawings. In Inconel 718, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Inconel 718 is picked for very high strength at temperatures up to about 650 °C. |
|---|---|
| Typical service | Oil & gas — Wellhead parts, hangers and high-strength bolting. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Inconel 718 (bar to ASTM B637, where applicable), as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiFeCr-2 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 718 Anchor Flange Chemical Composition
| Element | Weight % (producer reference) |
|---|---|
| Nickel (+Co) | 50.00 – 55.00 |
| Chromium | 17.00 – 21.00 |
| Iron | Balance |
| Niobium (+Ta) | 4.75 – 5.50 |
| Molybdenum | 2.80 – 3.30 |
| Titanium | 0.65 – 1.15 |
| Aluminium | 0.20 – 0.80 |
| Cobalt | 1.00 max |
Inconel 718 Anchor Flange Mechanical Properties
No specification requirement is asserted for this product form; requirements are to the purchase specification.
Full chemistry, properties and equivalents are on the Inconel 718 grade page.
Standards on this page
Other Inconel 718 flanges
Inconel 718 Anchor Flange — questions buyers ask
What information is needed to quote an anchor flange?
The project drawing with pipe size, wall, design loads and material, plus the inspection plan.
Can Inconel 718 anchor flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 718 anchor flanges?
The finished flange specification is project / purchase specification dependent, so none is named here; dimensions follow Project drawing. State the flange specification your project requires on the purchase order.
What decides the price of a Inconel 718 anchor flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Inconel 718 anchor flanges to NACE MR0175?
Yes. Inconel 718 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026