Super Duplex 2507 UnionASTM A182 · MSS SP-83 · Manufacturer, trader & exporter, India
UNS S32750 · W.Nr 1.4410
A Super Duplex 2507 union is a three-piece forged fitting that joins pipes and can be taken apart, made from Super Duplex 2507 to ASTM A182 F53. Unions let a small-bore line be disconnected for maintenance without cutting. Made to MSS SP-83 in threaded or socket-weld ends.
- ASTM A182
- MSS SP-83
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Union?
- What it is
- A three-piece forged fitting that joins pipes and can be taken apart
- Material
- ASTM A182 F53
- Dimensions
- MSS SP-83
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Union Specification
| Product | Super Duplex 2507 Union |
|---|---|
| Material standard | ASTM A182 F53 |
| Dimensional standard | MSS SP-83 |
| Sizes | ⅛" – 4" (ASME B16.11) |
| Wall / class | Class 2000 / 3000 / 6000 / 9000 |
| Ends | Socket weld · NPT threaded |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Union
Unions let a small-bore line be disconnected for maintenance without cutting. Made to MSS SP-83 in threaded or socket-weld ends.
- Three pieces: nut, male and female ends
- Threaded or socket weld
- Class 3000 / 6000
More on choosing: Union guide.
Super Duplex 2507 Union: Why 2507 for unions
Unions let a small-bore line be disconnected for maintenance without cutting. Made to MSS SP-83 in threaded or socket-weld ends. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex fittings match duplex pipe in chloride service and strength. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Union Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Union Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Other Super Duplex 2507 pipe fittings
Super Duplex 2507 Union — questions buyers ask
Can unions be used in high-pressure lines?
Class 3000 and 6000 unions are rated for high pressure on small bores, but many codes limit their use in hazardous service.
Can Super Duplex 2507 unions be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex 2507 unions?
The material is ASTM A182 F53; dimensions follow MSS SP-83. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex 2507 union?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Super Duplex 2507 unions to NACE MR0175?
Yes. Super Duplex 2507 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026