Super Duplex 2507 ReducerASTM A815 · ASME B16.9 · Manufacturer, trader & exporter, India
UNS S32750 · W.Nr 1.4410
A Super Duplex 2507 reducer is a fitting that joins two pipes of different sizes, made from Super Duplex 2507 to ASTM A815 WPS32750. Concentric reducers keep the centreline in line and suit vertical lines. Eccentric reducers keep one side flat — flat on top at pump suctions to avoid air pockets, flat on the bottom in pipe racks.
- ASTM A815
- ASME B16.9
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Reducer?
- What it is
- A fitting that joins two pipes of different sizes
- Material
- ASTM A815 WPS32750
- Dimensions
- ASME B16.9 · MSS SP-43
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Reducer Specification
| Product | Super Duplex 2507 Reducer |
|---|---|
| Material standard | ASTM A815 WPS32750 |
| Dimensional standard | ASME B16.9 · MSS SP-43 |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Reducer
Concentric reducers keep the centreline in line and suit vertical lines. Eccentric reducers keep one side flat — flat on top at pump suctions to avoid air pockets, flat on the bottom in pipe racks.
- Concentric and eccentric
- Flat-top on pump suction
- Seamless or welded
More on choosing: Reducer guide.
Super Duplex 2507 Reducer: Why 2507 for reducers
Concentric reducers keep the centreline in line and suit vertical lines. Eccentric reducers keep one side flat — flat on top at pump suctions to avoid air pockets, flat on the bottom in pipe racks. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex fittings match duplex pipe in chloride service and strength. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Reducer Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Reducer Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Other Super Duplex 2507 pipe fittings
Super Duplex 2507 Reducer dimensions — ASME B16.9
Values in mm, the same for every material; the wall thickness matches the pipe schedule.
| NPS | OD | Reducer length H |
|---|---|---|
| ½" | 21.3 | — |
| ¾" | 26.7 | 38 |
| 1" | 33.4 | 51 |
| 1½" | 48.3 | 64 |
| 2" | 60.3 | 76 |
| 3" | 88.9 | 89 |
| 4" | 114.3 | 102 |
| 6" | 168.3 | 140 |
| 8" | 219.1 | 152 |
| 10" | 273.1 | 178 |
| 12" | 323.9 | 203 |
| 16" | 406.4 | 356 |
| 20" | 508.0 | 508 |
| 24" | 610.0 | 508 |
Full chart: ASME B16.9 fitting dimensions.
Super Duplex 2507 Reducer — questions buyers ask
Why use an eccentric reducer at a pump suction?
Installed flat side up, it prevents air pockets that can cause cavitation.
Can Super Duplex 2507 reducers be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex 2507 reducers?
The material is ASTM A815 WPS32750; dimensions follow ASME B16.9 · MSS SP-43. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex 2507 reducer?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Super Duplex 2507 reducers to NACE MR0175?
Yes. Super Duplex 2507 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026