Inconel 600 UnionASTM B564 · MSS SP-83 · Manufacturer, trader & exporter, India
Alloy 600 · UNS N06600
An Inconel 600 union is a three-piece forged fitting that joins pipes and can be taken apart, made from Inconel 600 to ASTM B564. Unions let a small-bore line be disconnected for maintenance without cutting. Made to MSS SP-83 in threaded or socket-weld ends.
- ASTM B564
- MSS SP-83
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 600 Union?
- What it is
- A three-piece forged fitting that joins pipes and can be taken apart
- Material
- ASTM B564
- Dimensions
- MSS SP-83
- Grade
- Inconel 600 · UNS N06600
- Best at
- High-temperature oxidation, caustic and nuclear service
Inconel 600 Union Specification
| Product | Inconel 600 Union |
|---|---|
| Material standard | ASTM B564 |
| Dimensional standard | MSS SP-83 |
| Sizes | ⅛" – 4" (ASME B16.11) |
| Wall / class | Class 2000 / 3000 / 6000 / 9000 |
| Ends | Socket weld · NPT threaded |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Union
Unions let a small-bore line be disconnected for maintenance without cutting. Made to MSS SP-83 in threaded or socket-weld ends.
- Three pieces: nut, male and female ends
- Threaded or socket weld
- Class 3000 / 6000
More on choosing: Union guide.
Inconel 600 Union: Why 600 for unions
Unions let a small-bore line be disconnected for maintenance without cutting. Made to MSS SP-83 in threaded or socket-weld ends. In Inconel 600, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fittings match nickel-alloy pipe in aggressive media. Inconel 600 is picked for high-temperature oxidation, caustic and nuclear service. |
|---|---|
| Typical service | Furnaces & heat treating — Muffles, retorts and radiant tubes. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Inconel 600 Union Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Copper | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B168 for UNS N06600.
Inconel 600 Union Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B168 for UNS N06600 — Annealed plate.
Full chemistry, properties and equivalents are on the Inconel 600 grade page.
Standards on this page
Other Inconel 600 pipe fittings
Inconel 600 Union — questions buyers ask
Can unions be used in high-pressure lines?
Class 3000 and 6000 unions are rated for high pressure on small bores, but many codes limit their use in hazardous service.
Can Inconel 600 unions be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 600 unions?
The material is ASTM B564; dimensions follow MSS SP-83. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 600 union?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026