Inconel 600 Welded PipeASTM B517 · ASME B36.19 · Manufacturer, trader & exporter, India
Alloy 600 · UNS N06600
An Inconel 600 welded pipe is pipe formed from plate or strip and welded along its length, made from Inconel 600 to ASTM B517. Welded (ERW / EFW) pipe is economical in larger diameters and thinner walls, and accepted by most codes with the right testing.
- ASTM B517
- ASME B36.19
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 600 Welded Pipe?
- What it is
- Pipe formed from plate or strip and welded along its length
- Material
- ASTM B517
- Dimensions
- ASME B36.19 · B36.10
- Grade
- Inconel 600 · UNS N06600
- Best at
- High-temperature oxidation, caustic and nuclear service
Inconel 600 Welded Pipe Specification
| Product | Inconel 600 Welded Pipe |
|---|---|
| Material standard | ASTM B517 |
| Dimensional standard | ASME B36.19 · B36.10 |
| Sizes | NPS ⅛" – 24", Sch 5S – XXS |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Welded Pipe
Welded (ERW / EFW) pipe is economical in larger diameters and thinner walls, and accepted by most codes with the right testing.
- ERW and EFW
- Larger diameters available
- Weld bead removed or flush
More on choosing: Welded pipe guide.
Inconel 600 Welded Pipe: Why 600 for welded pipes
Welded (ERW / EFW) pipe is economical in larger diameters and thinner walls, and accepted by most codes with the right testing. In Inconel 600, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy tubulars handle acids, chlorides and heat. Inconel 600 is picked for high-temperature oxidation, caustic and nuclear service. |
|---|---|
| Typical service | Furnaces & heat treating — Muffles, retorts and radiant tubes. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Inconel 600 Welded Pipe Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Copper | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B168 for UNS N06600.
Inconel 600 Welded Pipe Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B168 for UNS N06600 — Annealed plate.
Full chemistry, properties and equivalents are on the Inconel 600 grade page.
Inconel 600 Welded Pipe — questions buyers ask
Is welded pipe accepted in pressure piping?
Yes, under ASME B31.3 with the weld joint factor for the specification and testing performed.
Can Inconel 600 welded pipes be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 600 welded pipes?
The material is ASTM B517; dimensions follow ASME B36.19 · B36.10. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 600 welded pipe?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026