S275JR Round TubeEN 10219 · Tube specification · Manufacturer, trader & exporter, India
EN 10025-2 S275JR · W.Nr 1.0044
An S275JR round tube is tube ordered by exact OD and wall thickness, for use with S275JR service. S275JR itself is a pipe or plate specification, so the matching round tube is made to EN 10219 square & rectangular sections — which is what we supply for S275JR lines. Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe.
- EN 10219
- Tube specification
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S275JR Round Tube?
- What it is
- Tube ordered by exact OD and wall thickness
- Material
- EN 10219 square & rectangular sections
- Dimensions
- Tube specification
- Grade
- S275JR
- Best at
- General structures, frames and fabrication
S275JR Round Tube Specification
| Product | S275JR Round Tube |
|---|---|
| Material standard | EN 10219 square & rectangular sections |
| Dimensional standard | Tube specification |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Round Tube
Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe.
- OD × wall ordering
- Seamless or welded
- Straight or U-bent
More on choosing: Round tube guide.
S275JR Round Tube: Why S275JR for round tubes
Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe. In S275JR, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel tubulars carry most hydrocarbon and utility service. S275JR is picked for general structures, frames and fabrication. |
|---|---|
| Typical service | Construction — Beams, frames and base plates. |
| Welding to carbon steel | Matching carbon or low-alloy filler is used; joints to stainless need ER309L |
| Matching filler | E7018 / ER70S-6 |
S275JR Round Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Copper | As specified |
| Nitrogen | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: EN 10025-2 for S275JR.
S275JR Round Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
| Charpy impact | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: EN 10025-2 for S275JR — condition per order.
Full chemistry, properties and equivalents are on the S275JR grade page.
Standards on this page
Other S275JR pipes & tubes
S275JR Round Tube — questions buyers ask
What is the difference between tube and pipe?
Tube is specified by exact OD and wall; pipe by nominal size and schedule.
Can S275JR round tubes be welded to carbon steel?
Yes — matching carbon or low-alloy filler is used; joints to stainless need ER309L.
Which standard covers S275JR round tubes?
The material is EN 10219 square & rectangular sections; dimensions follow Tube specification. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S275JR round tube?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026