Incoloy 800 / 800H / 800HT Hex NutUNS N08800 · ASME B18.2.2 · Manufacturer, trader & exporter, India
Alloy 800 · UNS N08800 / N08810 / N08811
An Incoloy 800 / 800H / 800HT hex nut is a standard hexagon nut. Finished fastener specification not asserted; may be machined from ASTM B408 bar (UNS N08800), where applicable; finished fastener requirements are to the purchase specification or project drawing. Standard hex nuts for general bolting, to ASME B18.2.2 or ISO 4032 (DIN 934 is the legacy DIN reference).
- UNS N08800
- ASME B18.2.2
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Incoloy 800 / 800H / 800HT Hex Nut?
- What it is
- A standard hexagon nut
- Finished spec
- Not asserted
- Material / feedstock
- ASTM B408 bar (UNS N08800), where applicable
- Dimensions
- ASME B18.2.2 · DIN 934 (legacy DIN)
- Grade
- Incoloy 800 / 800H / 800HT · UNS N08800
- Best at
- Furnaces, petrochemical heaters and high-temperature piping
Incoloy 800 / 800H / 800HT Hex Nut Specification
| Product | Incoloy 800 / 800H / 800HT Hex Nut |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | ASTM B408 bar (UNS N08800), where applicable |
| Dimensional standard | ASME B18.2.2 · DIN 934 (legacy DIN) |
| Manufacturing route | May be machined from bar, where applicable |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Hex Nut
Standard hex nuts for general bolting, to ASME B18.2.2 or ISO 4032 (DIN 934 is the legacy DIN reference).
- ASME B18.2.2 · DIN 934 (legacy DIN)
- Metric and inch
- Matching material to bolt
More on choosing: Hex nut guide.
Incoloy 800 / 800H / 800HT Hex Nut: Why 800 for hex nuts
Standard hex nuts for general bolting, to ASME B18.2.2 or ISO 4032 (DIN 934 is the legacy DIN reference). In Incoloy 800 / 800H / 800HT, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Incoloy 800 / 800H / 800HT is picked for furnaces, petrochemical heaters and high-temperature piping. |
|---|---|
| Typical service | Petrochemical — Steam-methane reformer and ethylene furnace piping. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Incoloy 800 / 800H / 800HT (bar to ASTM B408, where applicable), as the project specifies |
Incoloy 800 / 800H / 800HT Hex Nut Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Copper | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B409 for UNS N08800 / N08810.
Incoloy 800 / 800H / 800HT Hex Nut Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B409 for UNS N08800 / N08810 — Annealed plate.
Full chemistry, properties and equivalents are on the Incoloy 800 / 800H / 800HT grade page.
Standards on this page
Other Incoloy 800 / 800H / 800HT fasteners
Incoloy 800 / 800H / 800HT Hex Nut — questions buyers ask
Can I use a standard hex nut on flange studs?
Flange bolting normally specifies heavy hex nuts; standard hex nuts are for general joints.
What nut is used with Incoloy 800 / 800H / 800HT hex nuts?
Usually a nut in the same alloy — it may be machined from ASTM B408 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Incoloy 800 / 800H / 800HT hex nuts?
Finished fastener specification: Not asserted. Material / feedstock: ASTM B408 bar (UNS N08800), where applicable. Dimensions: ASME B18.2.2 · DIN 934 (legacy DIN). State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Incoloy 800 / 800H / 800HT hex nut?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026