Hastelloy C22 Threaded FlangeASTM B462 · ASME B16.5 · Manufacturer, trader & exporter, India
Alloy C-22 · UNS N06022 · THD
A Hastelloy C22 threaded flange is a flange with a tapered internal thread that screws onto threaded pipe, made from Hastelloy C22 to ASTM B462 / B564. Use a threaded flange where welding is not allowed — for example in explosive areas — on small-bore, low-pressure lines. Threads are NPT to ASME B1.20.1.
- ASTM B462
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Hastelloy C22 Threaded Flange?
- What it is
- A flange with a tapered internal thread that screws onto threaded pipe
- Material
- ASTM B462 / B564
- Dimensions
- ASME B16.5 · ASME B1.20.1
- Grade
- Hastelloy C22 · UNS N06022
- Best at
- Mixed oxidising and reducing acids, and weld overlays
Hastelloy C22 Threaded Flange Specification
| Product | Hastelloy C22 Threaded Flange |
|---|---|
| Material standard | ASTM B462 / B564 |
| Dimensional standard | ASME B16.5 · ASME B1.20.1 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Threaded Flange
Use a threaded flange where welding is not allowed — for example in explosive areas — on small-bore, low-pressure lines. Threads are NPT to ASME B1.20.1.
- NPT threads to ASME B1.20.1
- Not for cyclic or high-temperature service
- Seal-welding is sometimes added after make-up
More on choosing: Threaded flange guide.
Hastelloy C22 Threaded Flange: Why C22 for threaded flanges
Use a threaded flange where welding is not allowed — for example in explosive areas — on small-bore, low-pressure lines. Threads are NPT to ASME B1.20.1. In Hastelloy C22, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Hastelloy C22 is picked for mixed oxidising and reducing acids, and weld overlays. |
|---|---|
| Typical service | Chemical processing — Equipment seeing both oxidising and reducing conditions. |
| B16.5 material group | 3.8 |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Hastelloy C22 (bar to ASTM B574, where applicable), as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCrMo-10 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Hastelloy C22 Threaded Flange Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Iron | As specified |
| Tungsten | As specified |
| Cobalt | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B575 for UNS N06022.
Hastelloy C22 Threaded Flange Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B575 for UNS N06022 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Hastelloy C22 grade page.
Other Hastelloy C22 flanges
Hastelloy C22 Threaded Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
Hastelloy C22 Threaded Flange — questions buyers ask
Can threaded flanges be used in high-pressure service?
They are rated like other flanges in their class, but threaded joints are not recommended for cyclic, high-temperature or highly corrosive service.
What pressure rating does a Hastelloy C22 threaded flange have?
It depends on class and temperature. Hastelloy C22 forgings are in ASME B16.5 material group 3.8; read your class column in that group's table at the design temperature.
Can Hastelloy C22 threaded flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Hastelloy C22 threaded flanges?
The material is ASTM B462 / B564; dimensions follow ASME B16.5 · ASME B1.20.1. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Hastelloy C22 threaded flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Hastelloy C22 threaded flanges to NACE MR0175?
Yes. Hastelloy C22 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026