ASTM A335 P22 Spectacle BlindASTM A182 · ASME B16.48 · Manufacturer, trader & exporter, India
SA-335 P22 · 2¼Cr-1Mo alloy pipe · SB
An ASTM A335 P22 spectacle blind is a figure-8 plate with one solid end and one open ring, fitted between two flanges, for use with ASTM A335 P22 pipe. ASTM A335 P22 itself is a pipe or plate specification, so the matching spectacle blind is made to ASTM A182 F22 — which is what we supply for P22 lines. A spectacle blind lets operators positively isolate a line: rotate the solid end into the line to block flow, or the ring end to allow it. Larger sizes use separate spacers and paddle blanks.
- ASTM A182
- ASME B16.48
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an ASTM A335 P22 Spectacle Blind?
- What it is
- A figure-8 plate with one solid end and one open ring, fitted between two flanges
- Material
- ASTM A182 F22
- Dimensions
- ASME B16.48
- Grade
- ASTM A335 P22
- Best at
- High-pressure steam and hydrogen service up to about 580 °C
ASTM A335 P22 Spectacle Blind Specification
| Product | ASTM A335 P22 Spectacle Blind |
|---|---|
| Material standard | ASTM A182 F22 |
| Dimensional standard | ASME B16.48 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Spectacle Blind
A spectacle blind lets operators positively isolate a line: rotate the solid end into the line to block flow, or the ring end to allow it. Larger sizes use separate spacers and paddle blanks.
- Thickness set by class and size
- Paddle blank and spacer versions for large bores
- Handle or lifting lug to order
More on choosing: Spectacle blind guide.
ASTM A335 P22 Spectacle Blind: Why P22 for spectacle blinds
A spectacle blind lets operators positively isolate a line: rotate the solid end into the line to block flow, or the ring end to allow it. Larger sizes use separate spacers and paddle blanks. In ASTM A335 P22, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy flanges carry most utility, hydrocarbon and high-temperature service. ASTM A335 P22 is picked for high-pressure steam and hydrogen service up to about 580 °C. |
|---|---|
| Typical service | Power plants — High-pressure steam lines. |
| B16.5 material group | 1.10 — Group 1.10 applies to A182 F22 Class 3. Chrome-moly welds usually need PWHT; the code sets thickness exemptions. |
| Bolting | ASTM A193 B7 studs with A194 2H nuts; B16 with Gr 4 or 7 nuts where the temperature calls for it |
| Welding to carbon steel | Matching carbon or low-alloy filler is used; joints to stainless need ER309L |
| Matching filler | ER90S-B3 / E9018-B3 |
ASTM A335 P22 Spectacle Blind Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Molybdenum | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A335 Grade P22.
ASTM A335 P22 Spectacle Blind Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A335 Grade P22 — condition per order.
Full chemistry, properties and equivalents are on the ASTM A335 P22 grade page.
Other ASTM A335 P22 flanges
ASTM A335 P22 Spectacle Blind — questions buyers ask
When should I use a spacer and paddle blank instead of a spectacle blind?
In large sizes a spectacle blind becomes too heavy and awkward, so ASME B16.48 provides separate paddle blanks and spacers.
What pressure rating does a ASTM A335 P22 spectacle blind have?
It depends on class and temperature. ASTM A335 P22 forgings are in ASME B16.5 material group 1.10; read your class column in that group's table at the design temperature.
Can ASTM A335 P22 spectacle blinds be welded to carbon steel?
Yes — matching carbon or low-alloy filler is used; joints to stainless need ER309L.
Which standard covers ASTM A335 P22 spectacle blinds?
The material is ASTM A182 F22; dimensions follow ASME B16.48. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a ASTM A335 P22 spectacle blind?
The steel price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026