ASTM A333 Gr 6 NippleASTM A350 · MSS SP-95 · Manufacturer, trader & exporter, India
SA-333 Gr 6 · Low-temperature carbon steel pipe
An ASTM A333 Gr 6 nipple is a short length of pipe, threaded or plain, used to connect fittings, for use with ASTM A333 Gr 6 pipe. ASTM A333 Gr 6 itself is a pipe or plate specification, so the matching nipple is made to ASTM A350 LF2 — which is what we supply for A333 Gr 6 lines. Pipe nipples connect valves and fittings in small-bore lines. Swage nipples (MSS SP-95) also change size between their two ends.
- ASTM A350
- MSS SP-95
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an ASTM A333 Gr 6 Nipple?
- What it is
- A short length of pipe, threaded or plain, used to connect fittings
- Material
- ASTM A350 LF2
- Dimensions
- MSS SP-95 · ASME B36.10 / B36.19
- Grade
- ASTM A333 Gr 6
- Best at
- Cold-climate and refrigerated piping down to −45 °C
ASTM A333 Gr 6 Nipple Specification
| Product | ASTM A333 Gr 6 Nipple |
|---|---|
| Material standard | ASTM A350 LF2 |
| Dimensional standard | MSS SP-95 · ASME B36.10 / B36.19 |
| Sizes | ⅛" – 4" (ASME B16.11) |
| Wall / class | Class 2000 / 3000 / 6000 / 9000 |
| Ends | Socket weld · NPT threaded |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Nipple
Pipe nipples connect valves and fittings in small-bore lines. Swage nipples (MSS SP-95) also change size between their two ends.
- Close, short and long lengths
- Swage nipples to MSS SP-95
- Threaded both ends, one end, or plain
More on choosing: Nipple guide.
ASTM A333 Gr 6 Nipple: Why A333 Gr 6 for nipples
Pipe nipples connect valves and fittings in small-bore lines. Swage nipples (MSS SP-95) also change size between their two ends. In ASTM A333 Gr 6, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy fittings suit hydrocarbon, steam and utility lines. ASTM A333 Gr 6 is picked for cold-climate and refrigerated piping down to −45 °C. |
|---|---|
| Typical service | LNG & refrigeration — Cold process lines. |
| Welding to carbon steel | Matching carbon or low-alloy filler is used; joints to stainless need ER309L |
| Matching filler | E7018-1 / ER80S-Ni1 |
ASTM A333 Gr 6 Nipple Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A333 Grade 6.
ASTM A333 Gr 6 Nipple Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Charpy impact | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A333 Grade 6 — condition per order.
Full chemistry, properties and equivalents are on the ASTM A333 Gr 6 grade page.
Other ASTM A333 Gr 6 pipe fittings
ASTM A333 Gr 6 Nipple — questions buyers ask
What is a swage nipple?
A nipple that reduces from one size to another, concentric or eccentric, to MSS SP-95.
Can ASTM A333 Gr 6 nipples be welded to carbon steel?
Yes — matching carbon or low-alloy filler is used; joints to stainless need ER309L.
Which standard covers ASTM A333 Gr 6 nipples?
The material is ASTM A350 LF2; dimensions follow MSS SP-95 · ASME B36.10 / B36.19. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a ASTM A333 Gr 6 nipple?
The steel price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026