SS 347 FlangesASTM A182 F347 · Manufacturer, stockist & exporter, India
Also sold as AISI 347 · UNS S34700 · W.Nr 1.4550 · Niobium-stabilised stainless
SS 347 flanges are forged to ASTM A182 F347 and machined to ASME B16.5 (½"–24", Class 150–2500) or ASME B16.47 for larger sizes. It is a niobium-stabilised austenitic stainless steel, chosen for welded high-temperature piping in refineries and power plants. Kanak Steel & Engineering Co. supplies it with EN 10204 3.1 mill certificates from Mumbai to buyers across India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- Stock & mill supply
- EN 10204 3.1 / 3.2
- PMI on every heat
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is SS 347 Flanges?
SS 347 flanges is a niobium-stabilised austenitic stainless steel supplied as flanges to ASTM A182 F347 (UNS S34700). Buyers specify it for welded high-temperature piping in refineries and power plants. It is also sold as AISI 347, UNS S34700, W.Nr 1.4550.
- What it is
- Niobium-stabilised austenitic stainless steel
- Material
- ASTM A182 F347
- Dimensions
- ASME B16.5 · B16.47 · EN 1092-1
- Classes
- 150 · 300 · 600 · 900 · 1500 · 2500
- Facing
- RF · FF · RTJ
- Best at
- Welded high-temperature piping in refineries and power plants
SS 347 Flanges Specification & Sizes
| Material standard | ASTM A182 F347 |
|---|---|
| Dimensional standards | ASME B16.5 (½"–24") · B16.47 Series A / B (26"–60") · B16.36 orifice · B16.48 line blanks · EN 1092-1 |
| Pressure classes | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | Raised face (RF) · flat face (FF) · ring type joint (RTJ) · tongue & groove |
| Bore | To match the pipe schedule — specify it on the order |
| Types | Weld neck flange · Slip-on flange · Blind flange · Socket weld flange · Threaded flange · Lap joint flange · Long weld neck flange · Orifice flange · Spectacle blind · Reducing flange · Ring type joint flange · Expander flange · Anchor flange · Swivel ring flange |
| Testing | PMI · dimensional · UT of forgings · IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
Standards on this page
SS 347 Flange Pressure–Temperature Rating
The class is not a pressure: the allowable pressure for 347 flanges comes from the ASME B16.5 table for its material group, and falls as temperature rises (how ratings work). ASTM A182 F347 is in material group 2.5.
Take the actual pressures from the B16.5 rating table for group 2.5. A class is not a project pressure rating — your piping class sheet and design conditions govern.
Bolting & Gaskets for 347 Flanges
For SS 347 flanges the usual bolting is ASTM A193 B8C studs with A194 8C nuts — see SS 347 fasteners. Spiral-wound gaskets with a 304 or 316 winding suit most stainless raised-face joints. Facing and gasket options are compared in the flange guide.
SS 347 Flanges Chemical Composition
| Element | Weight % |
|---|---|
| Chromium | 17.0 – 19.0 |
| Nickel | 9.0 – 13.0 |
| Niobium | 10 × C min, 1.00 max |
| Carbon | 0.08 max |
| Manganese | 2.00 max |
| Silicon | 0.75 max |
| Phosphorus | 0.045 max |
| Sulphur | 0.030 max |
| Iron | Balance |
SS 347 Flanges Mechanical Properties
| Annealed plate & sheet | Value |
|---|---|
| Tensile strength | 515 MPa · 75 ksi |
| Yield strength 0.2% | 205 MPa · 30 ksi |
| Elongation | 40% |
| Hardness | 201 HB max |
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 7.96 g/cm³ |
| Melting range | 1400 – 1425 °C |
| Magnetic | Non-magnetic annealed |
| PREN (approx.) | ≈ 18 |
SS 347 Equivalent Grades
Values follow ASTM A240 for UNS S34700. Always check against the edition named on your purchase order.
SS 347 flange dimensions — ASME B16.5 Class 150 & 300
Outside dimensions depend only on size and class, not on the alloy, so 347 flanges bolt to any B16.5 flange of the same size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
Six-digit Harmonized System heading (iron and steel, chapter 72–73). Your country adds its own digits — confirm with your customs broker. All HS codes.
How to Verify SS 347 Flanges with PMI
Positive material identification with a handheld XRF gun confirms the alloy on the piece itself, in seconds, before it is cut or welded. SS 347 is most often mixed up with SS 321 — the table shows which elements tell them apart.
Handheld XRF does not measure carbon or nitrogen; those come from the mill certificate or optical emission (OES) testing. We PMI-test nickel alloys as standard and any grade on request.
| Element | SS 347 | SS 321 |
|---|---|---|
| Nickel | 9.0 – 13.0 | 9.0 – 12.0 |
| Chromium | 17.0 – 19.0 | 17.0 – 19.0 |
| Titanium | residual | 5 × (C + N) min, 0.70 max |
| Niobium | 10 × C min, 1.00 max | residual |
| Iron | Balance | Balance |
| Manganese | 2.00 max | 2.00 max |
SS 347 Flanges Price — What Decides It
Two quotes for "347 flanges" can differ by 20% and both be fair. We quote 347 flanges per kg for full sizes and per piece for cut sizes. These six things move the price per kg, so you can compare offers like for like.
SS 347 flanges by type
SS 347 Flanges Applications
SS 347 is specified when the cheaper grade will not survive the service but a higher alloy would be more than the job needs. These are the jobs our buyers use it for.
SS 347 Flanges vs 321, 304 and 310S
| Grade | Flanges standard | PREN (approx.) | Pick it when |
|---|---|---|---|
| SS 321 | ASTM A182 F321 | ≈ 18 | High-temperature service between 425 and 815 °C |
| SS 304 | ASTM A182 F304 | ≈ 18 | General corrosion resistance, food, water and architectural work |
| SS 347 | ASTM A182 F347 | ≈ 18 | Welded high-temperature piping in refineries and power plants |
| SS 310 / 310S | ASTM A182 F310 | ≈ 25 | Furnaces, burners and heat treatment at high temperature |
PREN = Cr + 3.3 Mo + 16 N, from mid-range chemistry. A screening guide, not a substitute for corrosion data on your medium.
SS 347 Corrosion Resistance — Element by Element
Each alloying addition has a job. Knowing which one protects against your medium is the quickest way to judge whether 347 fits.
About 18% chromium forms the passive film that makes the steel stainless.
Nickel keeps the structure austenitic — tough at low temperature and easy to form and weld.
Niobium binds carbon more stably than titanium, so 347 holds up in welded high-temperature service.
347H is the choice for hot hydrogen and high-temperature refinery piping.
How your 347 flanges order runs
- 01Enquiry review — we confirm size, standard edition and documents against your MR or drawing.
- 02Heat selection & PMI — the mill certificate is checked and material is PMI-tested before processing.
- 03Processing — cutting, machining or bevelling to your specification, with heat numbers marked.
- 04Inspection — your third-party inspector witnesses, or we share photos and test reports.
- 05Packing & dispatch — seaworthy packing from Nhava Sheva (JNPT), Mumbai, FOB or CIF, documents sent before the vessel sails.
Standards on this page
Welding & Fabricating SS 347 Flanges
SS 347 welds by all common arc processes. A few points our buyers ask about:
| Matching filler | ER347 (AWS A5.9) |
|---|---|
| Over-alloyed filler | ERNiCr-3 for dissimilar joints |
| Preheat | Not required; keep interpass temperature low |
| Cutting | Thermal or abrasive cutting; grind off heat-tinted edges before welding |
Follow your approved WPS; this is general guidance. See also 347 fittings and 347 flanges for the matching pipe-system parts.
How to Order SS 347 Flanges: RFQ Checklist
Get an accurate quote the first time. Copy this list into your enquiry:
- Flange type and dimensional standard (B16.5 / B16.47 / EN 1092-1)
- Size, pressure class and facing
- Bore / schedule for weld neck and socket weld flanges
- Material standard and grade marking
- Certificate type and extra tests
- Delivery port, Incoterm and required date
SS 347 flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSS 347 flanges — questions buyers ask
Is SS 347 the same as AISI 347?
Yes. AISI 347, UNS S34700, W.Nr 1.4550 all refer to the same material, and flanges is ordered to ASTM A182 F347 whichever name is on the enquiry.
Which standard covers SS 347 flanges?
ASTM A182 F347 is the material specification for the forging; dimensions follow ASME B16.5 for ½"–24" and ASME B16.47 for 26" and above. European projects use EN 1092-1.
What pressure can a SS 347 Class 300 flange take?
It depends on temperature. ASTM A182 F347 is in ASME B16.5 material group 2.5; read the Class 300 column of that group's table at your design temperature.
Which bolts should I use with SS 347 flanges?
Usually ASTM A193 B8C studs with A194 8C nuts. In corrosive or sour service the bolting material is set by the project specification.
Can a SS 347 flange be welded to a different pipe material?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel. Weld neck bores must match the mating pipe schedule.
SS 347 or SS 310 / 310S — which should I choose?
SS 347 is chosen for welded high-temperature piping in refineries and power plants. SS 310 / 310S is the step up when you need more pitting resistance or strength. See the comparison table on this page, or ask us with your process conditions.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026