Inconel 718 Hot-rolled PlateASTM B670 · ASTM A480 / B906 / A20 · Manufacturer, trader & exporter, India
Alloy 718 · UNS N07718
An Inconel 718 hot-rolled plate is plate rolled at high temperature and annealed or normalised, made from Inconel 718 to ASTM B670 · AMS 5596. Hot-rolled plate is the standard plate for vessels, tanks and structures, cut to size as needed.
- ASTM B670
- ASTM A480 / B906 / A20
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 718 Hot-rolled Plate?
- What it is
- Plate rolled at high temperature and annealed or normalised
- Material
- ASTM B670 · AMS 5596
- Dimensions
- ASTM A480 / B906 / A20
- Grade
- Inconel 718 · UNS N07718
- Best at
- Very high strength at temperatures up to about 650 °C
Inconel 718 Hot-rolled Plate Specification
| Product | Inconel 718 Hot-rolled Plate |
|---|---|
| Material standard | ASTM B670 · AMS 5596 |
| Dimensional standard | ASTM A480 / B906 / A20 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Hot-rolled Plate
Hot-rolled plate is the standard plate for vessels, tanks and structures, cut to size as needed.
- Standard plate route
- Full plates or cut to drawing
- Thickness 4.76 mm and up
More on choosing: Hot-rolled plate guide.
Inconel 718 Hot-rolled Plate: Why 718 for hot-rolled plates
Hot-rolled plate is the standard plate for vessels, tanks and structures, cut to size as needed. In Inconel 718, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy plate goes into vessels and tube sheets in aggressive media. Inconel 718 is picked for very high strength at temperatures up to about 650 °C. |
|---|---|
| Typical service | Oil & gas — Wellhead parts, hangers and high-strength bolting. |
| Matching filler | ERNiFeCr-2 (AWS A5.14) |
Inconel 718 Hot-rolled Plate Chemical Composition
| Element | Weight % (producer reference) |
|---|---|
| Nickel (+Co) | 50.00 – 55.00 |
| Chromium | 17.00 – 21.00 |
| Iron | Balance |
| Niobium (+Ta) | 4.75 – 5.50 |
| Molybdenum | 2.80 – 3.30 |
| Titanium | 0.65 – 1.15 |
| Aluminium | 0.20 – 0.80 |
| Cobalt | 1.00 max |
Inconel 718 Hot-rolled Plate Mechanical Properties
| Specification | Product form | Condition | Requirement values |
|---|---|---|---|
| ASTM B670 (B670-25) | plate, sheet, strip | annealed (per current scope) | As specified |
Numerical requirements are not shown until the current edition of each standard has been verified. Mechanical properties depend on product form, size, condition and heat treatment — state them on the purchase order.
Full chemistry, properties and equivalents are on the Inconel 718 grade page.
Inconel 718 Hot-rolled Plate — questions buyers ask
Is hot-rolled plate suitable for pressure vessels?
Yes, when supplied to the pressure-vessel specification and certified accordingly.
Which standard covers Inconel 718 hot-rolled plates?
The material is ASTM B670 · AMS 5596; dimensions follow ASTM A480 / B906 / A20. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 718 hot-rolled plate?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026