Hastelloy C276 Clad PlateASTM B575 · ASTM A264 / A265 · Manufacturer, trader & exporter, India
Alloy C-276 · UNS N10276
A Hastelloy C276 clad plate is carbon-steel plate bonded to a corrosion-resistant alloy layer, made from Hastelloy C276 to ASTM B575. Clad plate puts a thin alloy layer where the fluid is, on a cheaper carbon-steel base that carries the pressure — often far cheaper than solid alloy for thick vessels.
- ASTM B575
- ASTM A264 / A265
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Hastelloy C276 Clad Plate?
- What it is
- Carbon-steel plate bonded to a corrosion-resistant alloy layer
- Material
- ASTM B575
- Dimensions
- ASTM A264 / A265 · ASME SA-264 / SA-265
- Grade
- Hastelloy C276 · UNS N10276
- Best at
- The most aggressive mixed acids, wet chlorine and hypochlorite
Hastelloy C276 Clad Plate Specification
| Product | Hastelloy C276 Clad Plate |
|---|---|
| Material standard | ASTM B575 |
| Dimensional standard | ASTM A264 / A265 · ASME SA-264 / SA-265 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Clad Plate
Clad plate puts a thin alloy layer where the fluid is, on a cheaper carbon-steel base that carries the pressure — often far cheaper than solid alloy for thick vessels.
- Explosion-bonded or roll-bonded
- Alloy layer 2–6 mm typical
- Base: SA-516 or SA-387
More on choosing: Clad plate guide.
Hastelloy C276 Clad Plate: Why C276 for clad plates
Clad plate puts a thin alloy layer where the fluid is, on a cheaper carbon-steel base that carries the pressure — often far cheaper than solid alloy for thick vessels. In Hastelloy C276, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy plate goes into vessels and tube sheets in aggressive media. Hastelloy C276 is picked for the most aggressive mixed acids, wet chlorine and hypochlorite. |
|---|---|
| Typical service | Chemical processing — Reactors, heat exchangers and piping for mixed acids. |
| Matching filler | ERNiCrMo-4 (AWS A5.14) |
Hastelloy C276 Clad Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Molybdenum | As specified |
| Chromium | As specified |
| Iron | As specified |
| Tungsten | As specified |
| Cobalt | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B575 for UNS N10276.
Hastelloy C276 Clad Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B575 for UNS N10276 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Hastelloy C276 grade page.
Hastelloy C276 Clad Plate — questions buyers ask
When is clad plate cheaper than solid alloy?
Usually when the total thickness is well above the corrosion allowance — the thicker the vessel, the bigger the saving.
Which standard covers Hastelloy C276 clad plates?
The material is ASTM B575; dimensions follow ASTM A264 / A265 · ASME SA-264 / SA-265. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Hastelloy C276 clad plate?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026