Duplex 2205 Rectangular TubeASTM A554 · Manufacturer, trader & exporter, India
UNS S32205 / S31803 · W.Nr 1.4462
A Duplex 2205 rectangular tube is rectangular hollow section, made from Duplex 2205 to ASTM A554 (ornamental) · A312 / A790 for pressure. Rectangular tube is used for frames, supports and architectural work.
- ASTM A554
- ASTM A554 / EN 10219
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Duplex 2205 Rectangular Tube?
- What it is
- Rectangular hollow section
- Material
- ASTM A554 (ornamental) · A312 / A790 for pressure
- Dimensions
- ASTM A554 / EN 10219
- Grade
- Duplex 2205 · UNS S32205
- Best at
- Strength with chloride resistance at a stainless-steel budget
Duplex 2205 Rectangular Tube Specification
| Product | Duplex 2205 Rectangular Tube |
|---|---|
| Material standard | ASTM A554 (ornamental) · A312 / A790 for pressure |
| Dimensional standard | ASTM A554 / EN 10219 |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Rectangular Tube
Rectangular tube is used for frames, supports and architectural work.
- Rectangular hollow section
- Polished or mill finish
- Cut lengths
More on choosing: Rectangular tube guide.
Duplex 2205 Rectangular Tube: Why 2205 for rectangular tubes
Rectangular tube is used for frames, supports and architectural work. In Duplex 2205, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex tubulars combine strength and chloride resistance. Duplex 2205 is picked for strength with chloride resistance at a stainless-steel budget. |
|---|---|
| Typical service | Oil & gas — Flowlines, manifolds and topside piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2209 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Duplex 2205 Rectangular Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32205.
Duplex 2205 Rectangular Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32205 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Duplex 2205 grade page.
Standards on this page
Duplex 2205 Rectangular Tube — questions buyers ask
Are rectangular tubes structural?
In carbon steel they follow EN 10219 / 10210 for structures; stainless versions are mostly ornamental to ASTM A554.
Can Duplex 2205 rectangular tubes be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Duplex 2205 rectangular tubes?
The material is ASTM A554 (ornamental) · A312 / A790 for pressure; dimensions follow ASTM A554 / EN 10219. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Duplex 2205 rectangular tube?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026