Inconel 825 Weld Neck FlangeASTM B564 · ASME B16.5 · Manufacturer, stockist & exporter, India
Incoloy 825 · Alloy 825 · WNRF
An Inconel 825 weld neck flange is a flange with a long tapered hub that is butt-welded to the pipe, made from Inconel 825 to ASTM B564. Choose a weld neck flange for high pressure, high or low temperature and cyclic loading. The tapered hub moves stress away from the flange face, and the full-penetration butt weld can be radiographed.
- ASTM B564
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Weld Neck Flange?
- What it is
- A flange with a long tapered hub that is butt-welded to the pipe
- Material
- ASTM B564
- Dimensions
- ASME B16.5 · B16.47
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas
Inconel 825 Weld Neck Flange Specification
| Product | Inconel 825 Weld Neck Flange |
|---|---|
| Material standard | ASTM B564 |
| Dimensional standard | ASME B16.5 · B16.47 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Weld Neck Flange
Choose a weld neck flange for high pressure, high or low temperature and cyclic loading. The tapered hub moves stress away from the flange face, and the full-penetration butt weld can be radiographed.
- Bore must match the pipe schedule — state it on the order
- Hub length and taper per ASME B16.5 / B16.47 tables
- Most common facing: raised face; RTJ for high-pressure classes
More on choosing: Weld neck flange guide.
Inconel 825 Weld Neck Flange: Why 825 for weld neck flanges
Choose a weld neck flange for high pressure, high or low temperature and cyclic loading. The tapered hub moves stress away from the flange face, and the full-penetration butt weld can be radiographed. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
| B16.5 material group | 3.8 — B16.5 does not permit N08825 above 538 °C. |
| Bolting | B7 (coated), B8M or nickel-alloy studs such as Inconel 825 from ASTM B425, as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiFeCr-1 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 825 Weld Neck Flange Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | 38.0 – 46.0 |
| Iron | 22.0 min |
| Chromium | 19.5 – 23.5 |
| Molybdenum | 2.5 – 3.5 |
| Copper | 1.5 – 3.0 |
| Titanium | 0.6 – 1.2 |
| Carbon | 0.05 max |
| Manganese | 1.0 max |
Inconel 825 Weld Neck Flange Mechanical Properties
| Annealed | Value |
|---|---|
| Tensile strength | 586 MPa · 85 ksi |
| Yield strength 0.2% | 241 MPa · 35 ksi |
| Elongation | 30% |
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Other Inconel 825 flanges
Inconel 825 Weld Neck Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiInconel 825 Weld Neck Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
Inconel 825 Weld Neck Flange — questions buyers ask
Why is the bore important on a weld neck flange?
The flange bore is machined to the inside diameter of the pipe schedule, so the weld is smooth inside. A wrong bore leaves a step that disturbs flow and complicates the weld.
What pressure rating does a Inconel 825 weld neck flange have?
It depends on class and temperature. Inconel 825 forgings are in ASME B16.5 material group 3.8; read your class column in that group's table at the design temperature.
Can Inconel 825 weld neck flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 825 weld neck flanges?
The material is ASTM B564; dimensions follow ASME B16.5 · B16.47. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 825 weld neck flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Inconel 825 weld neck flanges to NACE MR0175?
Yes. Inconel 825 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026