SS 304 Ring Type Joint FlangeASTM A182 · ASME B16.5 · Manufacturer, stockist & exporter, India
AISI 304 · UNS S30400 · RTJ
An SS 304 ring type joint flange is a flange with a machined groove for a metal ring gasket, made from SS 304 to ASTM A182 F304. RTJ flanges are used for high pressure and temperature — typically Class 600 and above, and on wellhead and API equipment. The metal ring deforms into the groove to seal.
- ASTM A182
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 304 Ring Type Joint Flange?
- What it is
- A flange with a machined groove for a metal ring gasket
- Material
- ASTM A182 F304
- Dimensions
- ASME B16.5 · ASME B16.20
- Grade
- SS 304 · UNS S30400
- Best at
- General corrosion resistance, food, water and architectural work
SS 304 Ring Type Joint Flange Specification
| Product | SS 304 Ring Type Joint Flange |
|---|---|
| Material standard | ASTM A182 F304 |
| Dimensional standard | ASME B16.5 · ASME B16.20 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Ring Type Joint Flange
RTJ flanges are used for high pressure and temperature — typically Class 600 and above, and on wellhead and API equipment. The metal ring deforms into the groove to seal.
- Groove to ASME B16.20 ring numbers
- Ring gasket softer than the groove material
- Groove hardness checked on order
More on choosing: Ring type joint flange guide.
SS 304 Ring Type Joint Flange: Why 304 for ring type joint flanges
RTJ flanges are used for high pressure and temperature — typically Class 600 and above, and on wellhead and API equipment. The metal ring deforms into the groove to seal. In SS 304, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless flanges are chosen where carbon steel would rust or contaminate the process. SS 304 is picked for general corrosion resistance, food, water and architectural work. |
|---|---|
| Typical service | Food & dairy — Tanks, piping and equipment that must be cleaned daily. |
| B16.5 material group | 2.1 |
| Bolting | ASTM A193 B8 studs with A194 8 nuts |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER308 / ER308L (AWS A5.9) |
SS 304 Ring Type Joint Flange Chemical Composition
| Element | Weight % |
|---|---|
| Chromium | 17.5 – 19.5 |
| Nickel | 8.0 – 10.5 |
| Carbon | 0.07 max |
| Manganese | 2.00 max |
| Silicon | 0.75 max |
| Nitrogen | 0.10 max |
| Phosphorus | 0.045 max |
| Sulphur | 0.030 max |
SS 304 Ring Type Joint Flange Mechanical Properties
| Annealed plate & sheet | Value |
|---|---|
| Tensile strength | 515 MPa · 75 ksi |
| Yield strength 0.2% | 205 MPa · 30 ksi |
| Elongation | 40% |
| Hardness | 201 HB max |
Full chemistry, properties and equivalents are on the SS 304 grade page.
Other SS 304 flanges
SS 304 Ring Type Joint Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSS 304 Ring Type Joint Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
SS 304 Ring Type Joint Flange — questions buyers ask
Which ring gasket goes with an RTJ flange?
Oval or octagonal rings to ASME B16.20, in a material softer than the flange groove.
What pressure rating does a SS 304 ring type joint flange have?
It depends on class and temperature. SS 304 forgings are in ASME B16.5 material group 2.1; read your class column in that group's table at the design temperature.
Can SS 304 ring type joint flanges be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 304 ring type joint flanges?
The material is ASTM A182 F304; dimensions follow ASME B16.5 · ASME B16.20. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 304 ring type joint flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026