Inconel 625 Orifice FlangeASTM B564 · ASME B16.36 · Manufacturer, stockist & exporter, India
Alloy 625 · UNS N06625 · ORF
An Inconel 625 orifice flange is a pair of weld neck or slip-on flanges with pressure taps that hold an orifice plate, made from Inconel 625 to ASTM B564. Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate.
- ASTM B564
- ASME B16.36
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 625 Orifice Flange?
- What it is
- A pair of weld neck or slip-on flanges with pressure taps that hold an orifice plate
- Material
- ASTM B564
- Dimensions
- ASME B16.36
- Grade
- Inconel 625 · UNS N06625
- Best at
- Seawater, high strength and high temperature in one alloy
Inconel 625 Orifice Flange Specification
| Product | Inconel 625 Orifice Flange |
|---|---|
| Material standard | ASTM B564 |
| Dimensional standard | ASME B16.36 |
| Sizes | 1" – 24" (ASME B16.36) |
| Pressure class | Class 300 – 2500 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose an Orifice Flange
Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate.
- Class 300 minimum per ASME B16.36
- Supplied in pairs with jack screws
- Pressure taps: ½" NPT, two per flange
More on choosing: Orifice flange guide.
Inconel 625 Orifice Flange: Why 625 for orifice flanges
Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate. In Inconel 625, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Inconel 625 is picked for seawater, high strength and high temperature in one alloy. |
|---|---|
| Typical service | Offshore & subsea — Risers, flowlines and clad pipe. |
| B16.5 material group | 3.8 |
| Bolting | B7 (coated), B8M or nickel-alloy studs such as Inconel 625 from ASTM B446, as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCrMo-3 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 625 Orifice Flange Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | 58.0 min |
| Chromium | 20.0 – 23.0 |
| Molybdenum | 8.0 – 10.0 |
| Niobium + Tantalum | 3.15 – 4.15 |
| Iron | 5.0 max |
| Carbon | 0.10 max |
| Manganese | 0.50 max |
| Silicon | 0.50 max |
Inconel 625 Orifice Flange Mechanical Properties
| Grade 1 annealed plate | Value |
|---|---|
| Tensile strength | 827 MPa · 120 ksi |
| Yield strength 0.2% | 414 MPa · 60 ksi |
| Elongation | 30% |
Full chemistry, properties and equivalents are on the Inconel 625 grade page.
Other Inconel 625 flanges
Inconel 625 Orifice Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiInconel 625 Orifice Flange — questions buyers ask
Why is the minimum class 300 for orifice flanges?
ASME B16.36 starts at Class 300 so the flange is thick enough to drill the pressure taps radially.
What pressure rating does a Inconel 625 orifice flange have?
It depends on class and temperature. Inconel 625 forgings are in ASME B16.5 material group 3.8; read your class column in that group's table at the design temperature.
Can Inconel 625 orifice flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 625 orifice flanges?
The material is ASTM B564; dimensions follow ASME B16.36. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 625 orifice flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Inconel 625 orifice flanges to NACE MR0175?
Yes. Inconel 625 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026