Hastelloy C276 Lap Joint FlangeASTM B462 · ASME B16.5 · Manufacturer, stockist & exporter, India
Alloy C-276 · UNS N10276 · LJ
A Hastelloy C276 lap joint flange is a loose flange that sits behind a stub end welded to the pipe, made from Hastelloy C276 to ASTM B462 / B564. A lap joint flange rotates freely, making bolt alignment easy on lines that are dismantled often. In corrosive service the flange never touches the fluid, so it can be carbon steel while the stub end is the alloy — a big saving.
- ASTM B462
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Hastelloy C276 Lap Joint Flange?
- What it is
- A loose flange that sits behind a stub end welded to the pipe
- Material
- ASTM B462 / B564
- Dimensions
- ASME B16.5
- Grade
- Hastelloy C276 · UNS N10276
- Best at
- The most aggressive mixed acids, wet chlorine and hypochlorite
Hastelloy C276 Lap Joint Flange Specification
| Product | Hastelloy C276 Lap Joint Flange |
|---|---|
| Material standard | ASTM B462 / B564 |
| Dimensional standard | ASME B16.5 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Lap Joint Flange
A lap joint flange rotates freely, making bolt alignment easy on lines that are dismantled often. In corrosive service the flange never touches the fluid, so it can be carbon steel while the stub end is the alloy — a big saving.
- Used with a stub end (MSS SP-43 or ASME B16.9)
- Flange can be a cheaper material than the stub end
- Lower pressure rating than a weld neck
More on choosing: Lap joint flange guide.
Hastelloy C276 Lap Joint Flange: Why C276 for lap joint flanges
A lap joint flange rotates freely, making bolt alignment easy on lines that are dismantled often. In corrosive service the flange never touches the fluid, so it can be carbon steel while the stub end is the alloy — a big saving. In Hastelloy C276, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Hastelloy C276 is picked for the most aggressive mixed acids, wet chlorine and hypochlorite. |
|---|---|
| Typical service | Chemical processing — Reactors, heat exchangers and piping for mixed acids. |
| B16.5 material group | 3.8 |
| Bolting | B7 (coated), B8M or nickel-alloy studs such as Hastelloy C276 from ASTM B574, as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCrMo-4 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Hastelloy C276 Lap Joint Flange Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | Balance |
| Molybdenum | 15.0 – 17.0 |
| Chromium | 14.5 – 16.5 |
| Iron | 4.0 – 7.0 |
| Tungsten | 3.0 – 4.5 |
| Cobalt | 2.5 max |
| Carbon | 0.010 max |
| Manganese | 1.0 max |
Hastelloy C276 Lap Joint Flange Mechanical Properties
| Solution-annealed plate & sheet | Value |
|---|---|
| Tensile strength | 690 MPa · 100 ksi |
| Yield strength 0.2% | 283 MPa · 41 ksi |
| Elongation | 40% |
Full chemistry, properties and equivalents are on the Hastelloy C276 grade page.
Other Hastelloy C276 flanges
Hastelloy C276 Lap Joint Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiHastelloy C276 Lap Joint Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
Hastelloy C276 Lap Joint Flange — questions buyers ask
Does a lap joint flange have to be the same alloy as the pipe?
No. Only the stub end touches the fluid, so the backing flange is often carbon steel, saving the cost of an alloy forging.
What pressure rating does a Hastelloy C276 lap joint flange have?
It depends on class and temperature. Hastelloy C276 forgings are in ASME B16.5 material group 3.8; read your class column in that group's table at the design temperature.
Can Hastelloy C276 lap joint flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Hastelloy C276 lap joint flanges?
The material is ASTM B462 / B564; dimensions follow ASME B16.5. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Hastelloy C276 lap joint flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Hastelloy C276 lap joint flanges to NACE MR0175?
Yes. Hastelloy C276 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026