SS 316 / 316L PlugASTM A182 · ASME B16.11 · Manufacturer, trader & exporter, India
AISI 316L · UNS S31603
An SS 316 / 316L plug is a threaded fitting that closes a female connection, made from SS 316 / 316L to ASTM A182 F316L. Hex-head, square-head and round-head plugs close threaded outlets, drains and vents. Made to ASME B16.11.
- ASTM A182
- ASME B16.11
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 316 / 316L Plug?
- What it is
- A threaded fitting that closes a female connection
- Material
- ASTM A182 F316L
- Dimensions
- ASME B16.11
- Grade
- SS 316 / 316L · UNS S31603
- Best at
- Chloride-bearing process fluids, marine air and pharmaceutical service
SS 316 / 316L Plug Specification
| Product | SS 316 / 316L Plug |
|---|---|
| Material standard | ASTM A182 F316L |
| Dimensional standard | ASME B16.11 |
| Sizes | ⅛" – 4" (ASME B16.11) |
| Wall / class | Class 2000 / 3000 / 6000 / 9000 |
| Ends | Socket weld · NPT threaded |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Plug
Hex-head, square-head and round-head plugs close threaded outlets, drains and vents. Made to ASME B16.11.
- Hex, square and round head
- NPT threads
- Forged from bar
More on choosing: Plug guide.
SS 316 / 316L Plug: Why 316L for plugs
Hex-head, square-head and round-head plugs close threaded outlets, drains and vents. Made to ASME B16.11. In SS 316 / 316L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless fittings keep the line clean and corrosion-free. SS 316 / 316L is picked for chloride-bearing process fluids, marine air and pharmaceutical service. |
|---|---|
| Typical service | Chemical & process — Piping and vessels handling mild acids and chlorides. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER316L (AWS A5.9) |
SS 316 / 316L Plug Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Nitrogen | As specified |
| Phosphorus | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31603.
SS 316 / 316L Plug Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31603 — Annealed plate & sheet (316L).
Full chemistry, properties and equivalents are on the SS 316 / 316L grade page.
Other SS 316 / 316L pipe fittings
SS 316 / 316L Plug — questions buyers ask
Which plug head type should I use?
Hex-head plugs are easiest to tighten with a spanner; square-head suits older equipment; round-head is used where the plug should not be removed.
Can SS 316 / 316L plugs be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 316 / 316L plugs?
The material is ASTM A182 F316L; dimensions follow ASME B16.11. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 316 / 316L plug?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026