SS 316 / 316L Welded PipeASTM A312 · ASME B36.19 · Manufacturer, trader & exporter, India
AISI 316L · UNS S31603
An SS 316 / 316L welded pipe is pipe formed from plate or strip and welded along its length, made from SS 316 / 316L to ASTM A312 · A358. Welded (ERW / EFW) pipe is economical in larger diameters and thinner walls, and accepted by most codes with the right testing.
- ASTM A312
- ASME B36.19
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 316 / 316L Welded Pipe?
- What it is
- Pipe formed from plate or strip and welded along its length
- Material
- ASTM A312 · A358
- Dimensions
- ASME B36.19 · B36.10
- Grade
- SS 316 / 316L · UNS S31603
- Best at
- Chloride-bearing process fluids, marine air and pharmaceutical service
SS 316 / 316L Welded Pipe Specification
| Product | SS 316 / 316L Welded Pipe |
|---|---|
| Material standard | ASTM A312 · A358 |
| Dimensional standard | ASME B36.19 · B36.10 |
| Sizes | NPS ⅛" – 24", Sch 5S – XXS |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Welded Pipe
Welded (ERW / EFW) pipe is economical in larger diameters and thinner walls, and accepted by most codes with the right testing.
- ERW and EFW
- Larger diameters available
- Weld bead removed or flush
More on choosing: Welded pipe guide.
SS 316 / 316L Welded Pipe: Why 316L for welded pipes
Welded (ERW / EFW) pipe is economical in larger diameters and thinner walls, and accepted by most codes with the right testing. In SS 316 / 316L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless tubulars are the default for corrosive and hygienic service. SS 316 / 316L is picked for chloride-bearing process fluids, marine air and pharmaceutical service. |
|---|---|
| Typical service | Chemical & process — Piping and vessels handling mild acids and chlorides. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER316L (AWS A5.9) |
SS 316 / 316L Welded Pipe Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Nitrogen | As specified |
| Phosphorus | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31603.
SS 316 / 316L Welded Pipe Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31603 — Annealed plate & sheet (316L).
Full chemistry, properties and equivalents are on the SS 316 / 316L grade page.
Other SS 316 / 316L pipes & tubes
SS 316 / 316L Welded Pipe — questions buyers ask
Is welded pipe accepted in pressure piping?
Yes, under ASME B31.3 with the weld joint factor for the specification and testing performed.
Can SS 316 / 316L welded pipes be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 316 / 316L welded pipes?
The material is ASTM A312 · A358; dimensions follow ASME B36.19 · B36.10. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 316 / 316L welded pipe?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026