Monel 400 Stud BoltASTM F468 · ASME B18.31.2 · Manufacturer, trader & exporter, India
Alloy 400 · UNS N04400
A Monel 400 stud bolt is a fully threaded rod supplied with two heavy hex nuts. ASTM F468 (N04400) where specified, 0.250–1.500 in.; otherwise may be machined from ASTM B164 bar (UNS N04400), where applicable — finished requirements to the purchase specification or project drawing. Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables.
- ASTM F468
- ASME B18.31.2
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Monel 400 Stud Bolt?
- What it is
- A fully threaded rod supplied with two heavy hex nuts
- Finished spec
- ASTM F468 (N04400) where specified, 0.250–1.500 in.
- Material / feedstock
- ASTM B164 bar (UNS N04400), where applicable
- Dimensions
- ASME B18.31.2 · B16.5 bolting tables
- Grade
- Monel 400 · UNS N04400
- Best at
- Seawater, hydrofluoric acid and marine service
Monel 400 Stud Bolt Specification
| Product | Monel 400 Stud Bolt |
|---|---|
| Finished fastener specification | ASTM F468 (N04400) where specified, 0.250–1.500 in. |
| Material / feedstock specification | ASTM B164 bar (UNS N04400), where applicable |
| Dimensional standard | ASME B18.31.2 · B16.5 bolting tables |
| Manufacturing route | To the finished specification where specified; otherwise machining from bar, where applicable |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Stud Bolt
Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables.
- Fully threaded, with two heavy hex nuts
- Length per ASME B16.5 flange class
- UNC up to 1", UN-8 above
More on choosing: Stud bolt guide.
Monel 400 Stud Bolt: Why 400 for stud bolts
Stud bolts are the standard bolting for pipe flanges. Length is measured end-to-end excluding points, per ASME B16.5 bolting tables. In Monel 400, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Monel 400 is picked for seawater, hydrofluoric acid and marine service. |
|---|---|
| Typical service | Marine — Pump shafts, valves and seawater piping. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Monel 400 (bar to ASTM B164, where applicable), as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Monel 400 Stud Bolt Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Copper | As specified |
| Iron | As specified |
| Manganese | As specified |
| Carbon | As specified |
| Silicon | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B127 for UNS N04400.
Monel 400 Stud Bolt Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B127 for UNS N04400 — Annealed plate.
Full chemistry, properties and equivalents are on the Monel 400 grade page.
Standards on this page
Other Monel 400 fasteners
Monel 400 Stud Bolt — questions buyers ask
How is stud bolt length measured?
From first thread to first thread, excluding chamfered points, as tabulated in ASME B16.5.
What nut is used with Monel 400 stud bolts?
Usually a nut in the same alloy — it may be machined from ASTM B164 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Monel 400 stud bolts?
Finished fastener specification: ASTM F468 (N04400) where specified, 0.250–1.500 in.. Material / feedstock: ASTM B164 bar (UNS N04400), where applicable. Dimensions: ASME B18.31.2 · B16.5 bolting tables. State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Monel 400 stud bolt?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026