Duplex 2205 ElbowASTM A815 · ASME B16.9 · Manufacturer, trader & exporter, India
UNS S32205 / S31803 · W.Nr 1.4462
A Duplex 2205 elbow is a fitting that changes the direction of a pipe run, made from Duplex 2205 to ASTM A815 WPS31803 / WPS32205 (buttweld) · ASTM A182 F51 / F60 (forged). Elbows come in 45°, 90° and 180° (return) angles. Long-radius (1.5D) is the default for flow; short-radius (1D) saves space. Buttweld elbows follow ASME B16.9; socket-weld and threaded elbows follow ASME B16.11.
- ASTM A815
- ASME B16.9
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Duplex 2205 Elbow?
- What it is
- A fitting that changes the direction of a pipe run
- Material
- ASTM A815 WPS31803 / WPS32205 (buttweld) · ASTM A182 F51 / F60 (forged)
- Dimensions
- ASME B16.9 · B16.11
- Grade
- Duplex 2205 · UNS S32205
- Best at
- Strength with chloride resistance at a stainless-steel budget
Duplex 2205 Elbow Specification
| Product | Duplex 2205 Elbow |
|---|---|
| Material standard | ASTM A815 WPS31803 / WPS32205 (buttweld) · ASTM A182 F51 / F60 (forged) |
| Dimensional standard | ASME B16.9 · B16.11 |
| Sizes | Buttweld ½" – 48" · forged ⅛" – 4" |
| Wall / class | Schedule to match pipe · Class 3000 / 6000 (forged) |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Elbow
Elbows come in 45°, 90° and 180° (return) angles. Long-radius (1.5D) is the default for flow; short-radius (1D) saves space. Buttweld elbows follow ASME B16.9; socket-weld and threaded elbows follow ASME B16.11.
- LR (1.5D) and SR (1D) radius
- 45°, 90° and 180° return
- Seamless or welded construction
More on choosing: Elbow guide.
Duplex 2205 Elbow: Why 2205 for elbows
Elbows come in 45°, 90° and 180° (return) angles. Long-radius (1.5D) is the default for flow; short-radius (1D) saves space. Buttweld elbows follow ASME B16.9; socket-weld and threaded elbows follow ASME B16.11. In Duplex 2205, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex fittings match duplex pipe in chloride service and strength. Duplex 2205 is picked for strength with chloride resistance at a stainless-steel budget. |
|---|---|
| Typical service | Oil & gas — Flowlines, manifolds and topside piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2209 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Duplex 2205 Elbow Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32205.
Duplex 2205 Elbow Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32205 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Duplex 2205 grade page.
Standards on this page
Other Duplex 2205 pipe fittings
Duplex 2205 Elbow dimensions — ASME B16.9
Values in mm, the same for every material; the wall thickness matches the pipe schedule.
| NPS | OD | 90° LR elbow A | 45° elbow B | 90° SR elbow |
|---|---|---|---|---|
| ½" | 21.3 | 38 | 16 | — |
| ¾" | 26.7 | 38 | 19 | — |
| 1" | 33.4 | 38 | 22 | 25 |
| 1½" | 48.3 | 57 | 29 | 38 |
| 2" | 60.3 | 76 | 35 | 51 |
| 3" | 88.9 | 114 | 51 | 76 |
| 4" | 114.3 | 152 | 64 | 102 |
| 6" | 168.3 | 229 | 95 | 152 |
| 8" | 219.1 | 305 | 127 | 203 |
| 10" | 273.1 | 381 | 159 | 254 |
| 12" | 323.9 | 457 | 190 | 305 |
| 16" | 406.4 | 610 | 254 | 406 |
| 20" | 508.0 | 762 | 318 | 508 |
| 24" | 610.0 | 914 | 381 | 610 |
Full chart: ASME B16.9 fitting dimensions.
Duplex 2205 Elbow — questions buyers ask
Long radius or short radius elbow?
Long radius gives lower pressure drop and is the default. Short radius is used where space is tight, with a small pressure-rating reduction per ASME B16.9.
Can Duplex 2205 elbows be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Duplex 2205 elbows?
The material is ASTM A815 WPS31803 / WPS32205 (buttweld) · ASTM A182 F51 / F60 (forged); dimensions follow ASME B16.9 · B16.11. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Duplex 2205 elbow?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Duplex 2205 elbows to NACE MR0175?
Yes. Duplex 2205 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026